1·Too high an open circuit voltage reduces the frequency of short circuiting.
一太高的开的回路电压降低短路的频率。
2·Spattering occurred in both normal and instantaneous short circuiting processes.
在正常短路与瞬时短路两种过程中均能产生飞溅。
3·When dealing with logical operators you run into a phenomenon called" short circuiting."
操作逻辑运算符时，我们会遇到一种名为“短路”的情况。
4·The inductance of the welding machine controls the rate at which the short circuiting current increases.
机器这个电感的那些焊接的那些比率在哪个那些增加短路电流。
5·Too low an inductance gives rise to a very high short circuiting current and consequently high pinching rate.
一个太低的电感引起非常高的短路电流和从而高的折磨的比率。
6·The results of experiments indicate that with short circuiting transfer mode, sound weld can be achieved in high speed welding.
试验结果表明，采用短路过渡焊接可以有效地防止驼峰焊道的产生，提高焊接速度。
7·In this paper, basing on analyzing the reasons for splashing of CO2 welding the control project of short circuiting transfer is probing.
本文精确分析CO 2焊飞溅产生的机理，在此基础上探讨了短路过渡过程的控制策略。
8·The experimental results show that the short circuiting protective circuit is fast, safe, reliable and simple, and is of great application value.
试验结果表明：短路保护快速、安全、可靠、简便，具有较大的应用价值。
9·In this paper, the new power source for CO2 short circuiting transfer is researched which is based on the technology of microcomputer and wave control.
本文以波控技术为基本指导思想，应用微机技术，对CO_2焊短路过渡用电源加以研究。
10·The harmonious control idea of the short circuiting transfer of the CO2 shielded arc welding is put forward in this paper, and its control system is set up.
提出了CO2气体保护焊短路过渡的和谐控制思想，并建立了相应的控制系统。